Sea Frost DC 5000 Especificações descarregar pdf (Página 48)

148 OLD CONCORD TURNPIKE BARRINGTON, NH 03825 USA TEL (603) 868-5720 FAX (603) 868-1040 1-800-435-6708

E-Mail:[email protected] www.seafrost.com

THERMOSTAT CALIBRATION INSTRUCTIONS

Note: Be sure that the unit is operating properly before making any thermostat

adjustments. The sensing bulb must be in excellent thermal contact with the plate or

block.

The range of this control may be changed. To access

the adjustment screw, remove the four mounting

screws on the thermostat panel. Tip the panel forward

and make the adjustment with a torx or small phillips

head screwdriver.

Make small adjustments. Record all adjustments.

If the lowest setting on the thermostat panel is too

cold:

• Turn the adjustment screw clockwise. One

360-degree turn will raise the box temperature

approximately 6 degrees f.

If the highest setting on the thermostat panel is too

warm:

• Turn the adjustment screw counterclockwise.

1 2 ... 43 44 45 46 47 48 49

Sem comentários

Sea Frost DC 5000 Especificações Página 48